Getting Started

Installation

The ouster sensor command line utility comes with the ouster-sdk python package.

pip3 install ouster-sdk

Using the cli

After installation you should have access to the ouster-cli utility, a command line interface which is the main entry point to our internal tools. It is organized as a tree of commands. To see what this means, open a terminal and type:

ouster-cli

Note

On Ubuntu, if you’re working outside a virtual environment, you may have to add ouster-cli to your path:

export PATH=$PATH:/.local/bin

We recommend using python virtual environments for all users!

That should return a menu of some possible commands, among them, discover, source and util. Each of these is itself the key to a submenu of further commands. Let’s try looking at source:

  1. First download the sample data here Download Data.

  2. Next run the following to see a list of commands

ouster-cli source <PCAP FILE>

You should see a few commands listed there, including viz and info. To figure out how to use them, try using --help. For example, for help with the ouster-cli source <SAMPLE PCAP FILE> viz command:

ouster-cli source <SAMPLE PCAP FILE> viz --help

Remember that you can use --help with any ouster-cli command, regardless how far down the menu tree you are.

If you have a live sensor, you can replace the <SAMPLE PCAP FILE> with the hostname of the sensor.

To see a full list of flags and options for the viz command, run the following:

ouster-cli source <SENSOR HOSTNAME> viz --help

By default, running ouster-cli source <SENSOR HOSTNAME> viz will reconfigure the sensor to transmit lidar packets to the host running ouster-cli and reinitialize the sensor. The -x and -y flags for the viz command disable re-initialization and packet destination auto-configuration, respectively.

Ubuntu UFW Firewall may cause: No packets received within 1.0s

On some Ubuntu setups we’ve observed the situations when everything is configured properly so that:

  • sensor is seen on the network and its Web page can be reached

  • sensor destination IP is set to the IP of the computer where data is expected

  • sensor lidar port is known (i.e. default 7502, or some others)

  • sensor is in RUNNING state

  • sensor lidar packets traffic is seen on the expected machine and can be recorded with tcpdump -w command to a pcap file (or Wireshark tools)

  • CLI comamnd ouster-cli source <SENSOR HOSTNAME> {info,config} are working properly

  • Viz ouster-cli source <PCAP FILE> viz from the tcpdump recorded pcap can be played and visualized

But ouster-cli source <SENSOR HOSTNAME> viz, or ouster-cli source <SENSOR HOSTNAME> record still can’t receive any packets and get the following error:

ouster.client.core.ClientTimeout: No packets received within 1.0s

Please check your UFW Firewall settings and try to allow the UDP traffic for 7502 (or whatever the UDP Port Lidar is set on the sensor):

sudo ufw allow 7502/udp

What next?

You can now to use ouster-cli as you please, exploring available utilities with the handy ---help. If you’d prefer something more documented, you can check out our Sample Sessions to see what an ouster-cli workflow might look like, or you can read through Common Use Cases.