Start mapping with the Ouster-CLI

Installation

The Ouster CLI mapping functionality is a part of the Ouster SDK Python package.

To install the Ouster SDK with the mapping capabilities:

$ python3 install ouster-sdk

Mapping Tools

After installing the Ouster SDK and mapping dependencies, you can explore various mapping tools using a connected Ouster sensor or a PCAP/OSF file.

To explore and configure the parameters of the SLAM algorithm, you can use the --help flag to view the available options.

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam --help

The slam command can be combined with either or both the save and viz commands. You can further explore each command in detail by accessing their respective submenus using the --help flag.

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam save --help

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam viz --help

SLAM Command

Simultaneous Localization and Mapping (SLAM) is a technique that enables a system to construct a map of its surroundings while simultaneously determining its own position on that map.

We use the slam algorithm to determine the lidar movement trajectory, correct motion distortion and reconstruct a detailed and precise point cloud map.

Connect to a sensor or use a PCAP/OSF file Download Sample PCAP File

Note

Connecting to an Ouster sensor is covered in the Networking Guide section of the Ouster Sensor Documentation.

Then execute the following command:

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam viz -e exit save sample.osf

Note

Please replace <HOSTNAME> with the corresponding hostname or IP of your sensor, and replace <FILENAME> with the actual file path and name of the PCAP/OSF file. Similarly, make the necessary substitutions in the subsequent commands.

Save Command

The save command stores the lidarscan and the lidar movement trajectory into a OSF file by specifying a filename with a .osf extension. This OSF file will be used for accumulated point cloud generation and the other post-process tools we offer in the future.

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam save sample.osf

The save command can also be used to generated an accumulated point cloud map using a SLAM-generated OSF file in LAS (.las), PLY (.ply), or PCD (.pcd) format. The output format depends on the extension of the output filename. For example, to convert the OSF file we generated using the slam command to PLY format, we can simply use the following:

ouster-cli source sample.osf save output.ply

You can utilize the slam command with the save command to directly generate a cumulative point cloud map. However, please be aware that this combined process can be resource-intensive. We recommend using this approach with a PCAP/OSF file rather than with a live sensor to avoid SLAM performance degradation.

ouster-cli source <FILENAME> slam save output.ply

The accumulated point cloud data is automatically split and downsampleed into multiple files to prevent exporting a huge size file. The terminal will display details, and you will see the following printout for each output file:

Output file: output-000.ply
3932160 points accumulated during this period,
154228 near points are removed [3.92 %],
1475955 down sampling points are removed [37.54 %],
2213506 zero range points are removed [56.29 %],
88471 points are saved [2.25 %].

Use the --help flag for more information such as adjusting the minimal range, selecting different fields as values, and changing the point cloud downsampling scale etc.

You can use an open source software CloudCompare to import and view the generated point cloud data files.

Viz Command

The viz command enables visualizing the accumulated point cloud generation during the SLAM process. By default, the viz operates in looping mode, meaning the visualiation will continuously replay the source file.

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam viz

When combining the viz and save commands, the saving process will automatically terminate after the first iteration, and then the SLAM process restarts for each subsequent lidar scan iteration. To end the SLAM and visualization processes after the save operation completes, you can use ctrl + c. Alternatively, you can add -e exit to the viz command to terminate the process after a complete iteration.

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam viz -e exit save sample.osf

Scans Accumulation: The viz command allows the user to customize …

Available view modes

There are three view modes of ScansAccumulator, that may be enabled/disabled depending on it’s params and the data that is passed throught it:

  • poses (or TRACK), key 8 - all scan poses in a trajectory/path view (available only if poses data is present in scans)

  • scan map (or MAP), key 7 - overall map view with select ratio of random points from every scan (available for scans with/without poses)

  • scan accum (or ACCUM), key 6 - accumulated N scans (key frames) that is picked according to params (available for scans with/without poses)

Key bindings

Keyboard controls available with ScansAccumulator:

Key

What it does

6

Toggle scans accumulation view mode (ACCUM)

7

Toggle overall map view mode (MAP)

8

Toggle poses/trajectory view mode (TRACK)

k / K

Cycle point cloud coloring mode of accumulated clouds or map

g / G

Cycle point cloud color palette of accumulated clouds or map

j / J

Increase/decrease point size of accumulated clouds or map

Ouster CLI ScansAccumulator options:

  • --accum-num N - accumulate N scans (default: 0)

  • --accum-every K - accumulate every Kth scan (default: 1)

  • --accum-every-m M - accumulate a scan every Mth meters traveled (default: None)

  • --accum-map - enable the overall map accumulation, select some percentage of points from every scan (default: disabled)

  • --accum-map-ratio R - set R as a ratio of points to randomly select from every scan (default: 0.001 (0.1%))

Dense accumulated clouds view (with every point of a scan)

To obtain the densest view use the --accum-num N --accum-every 1 params where N is the number of clouds to accumulate (N up to 100 is generally small enough to avoid slowing down the viz interface):

ouster-cli source <SENSOR_HOSTNAME> / <FILENAME> slam viz --accum-num 20 save sample.osf

and the dense accumulated clouds result:

../_images/scans_accum_dense_every.png

Dense view of 20 accumulated scans during the slam viz run

Overall map view (with poses)

One of the main tasks we frequently need is a preview of the overall map. We can test this by using the generated OSF file, which was created with the above command and contains the SLAM-generated LidarScan.pose property.

ouster-cli source sample.osf viz --accum-num 20 \
--accum-every 0 --accum-every-m 10.5 --accum-map -r 0 -e stop

Here is a preview example of the overall map generated from the accumulated scan results. By utilizing the ‘-e stop’ option, the visualizer stops once the replay process finishes, displaying the preview of the lidar trajectory:

../_images/scans_accum_map_all_scan.png

Data fully replayed with map and accum enabled (last current scan is displayed here in grey palette)