Features / Releases Support Table

Features / Releases Support Table

Features

Supported FW Versions

Supported HW Revisions

Signal multiplier

2.1.0 and higher

Rev C (PN: 840-102XXX-C) and higher

Azimuth window masking

2.1.0 and higher

Rev C (PN: 840-102XXX-C) and higher

Calibrated reflectivity

2.1.0 and higher

OS0 & OS1 Rev C (PN: 840-102XXXC) and higher

Dual Returns

2.2.0 and higher

Rev 06 (PN:840-102xxx-06) and higher

Channel Data Profiles (Single Return, Low Data Rate) & Sensor Telemetry

2.3.0 and higher

All Hardware revisions

1024x20 mode,

Dual Returns with 2048x10 mode,

Shot limiting status flags,

Azimuth laser masking,

Signal multiplier modes - 0.25, 0.5 Mode

3.0.0 and higher

Rev7 and later

Note

Channel Data Profiles (Single Return, Low Data Rate configurations along with Dual returns) were added as part of the Configurable Data Packet Format in FW 2.3. Please note in order to enable dual returns the user needs to have both a Rev 06 sensor or later and FW version 2.2 or later.

Note

Internal Temperature using Sensor Telemetry can be measured only on Rev 06 and later sensors.

Note

GEN 1 OS Sensors are no longer supported for firmware v3.0.0 and later. Please contact our contact our Field Application Team if you have more questions.